Home > Products > Tacky flux

Tacky flux

  • Acid Pb Flux Core Solder Wire Sn55Pb45

    Contact NowAcid Pb Flux Core Solder Wire Sn55Pb45Acid Pb flux core solder wire Sn55Pb45 BBIEN TL-04 Sn55Pb45 RMA is a mildly activated,general-purpose wire solder for use in applications requiring good activation.RMA cored wire is active enough for excellent tarnish or oxide removal,and will produce bright shiny solder joints.RMA lead Sn-Pb solder wire will leave slight to moderate post-process residues that may be left on noncritical applications,but should be removed from any critical applications.RMA cored wire meets Mil-Spec cleanliness requirements without cleaning.IPC flux classification for this material is ROL0. Diameter above 0.3mm(0.5mm,0.8mm,1.0mm,1.5mm,2.0mm) Packing:100g,200g,250g,500g,1kg per spoolRead More

  • Liquid Solder Flux

    Contact NowLiquid Solder FluxLiquid solder flux BBIEN LF-01 liquid wave solder flux is activated rosin liquid flux is a homogeneous solution of high quality purified high grade rosin in a specially blended alcohol vehicle into which a very small amount of an extremely effective activating agent has been incorpo-rated.BBIEN LF-01 flux is classified as Type ROL1 flux under IPC ANSI/J-STD-004 Joint Industry Standard. BBIEN LF-01 is a high quality lead free solder flux,also a low solids,weak-halide,no-clean flux that is designed for wave solder,selective solder and touch up processes,it approved as type RMA and has proven to be nearly as active in fluxing ability as highly activated rosin fluxes,but the flux and its residue are considerably less conductive.The low conductivity results from a minimum of ionic activating agent as shown by the very high water extract resistivity.The rosin residue is non-corrosive,non-conductive,and moisture and fungus resistant.The dry rosin residue actually insulates the surface from atmospheric corrosion.General packing is 16kg/20l per drumRead More

  • 0.1mm No-clean Flux Core Wire Solder Sn96.5Ag3.0Cu0.5

    Contact Now0.1mm No-clean Flux Core Wire Solder Sn96.5Ag3.0Cu0.5No-clean flux core wire solder 0.1mm to 3.0mm BBIEN LF-01 Sn96.5Ag3.0Cu0.5 BBIEN LF-01 Sn96.5Ag3.0Cu0.5 no clean flux core solder wire are both a halide-free and halogen type available,not water-soluble,flux cored and solid solder wire,melting point is 217 degree Celsius high temperature.BBIEN LF-01 Sn96.5Ag3.0Cu0.5 Pb free tin-silver solder wire is also belongs to RoHS standard wire solder,the diameter of this solder can be above 0.1mm(0.1mm~0.15mm),0.2mm,0.3mm…1,0mm…Read More

  • BGA Tacky Solder Flux

    Contact NowBGA Tacky Solder FluxBGA tacky solder flux BBIEN tacky paste flux is available for a wide range of applications,including rework as well as flip chip attach and BGA/CSP ball attach.They may be applied by printing,dispensing,pin transfer and dipping.Spraying and foaming for selected products is possible.Our special tacky solder flux is based on both halogen-free and halogen type ball attach flux and a blend of fine powder to allow stencil and dispensing BGA manufacturers best possible yields. Packing: 1.For stencil screen printing technical using:100g per jar/can 2.For dispensing joint soldering technical using:10cc per syringe tube/cartridgeRead More

Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions,        sales events, pre-order sales & more!
Connect with BBIEN
Become our fan, follow us & subscribe for the latest updates        and deals
QR Code
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Download & Knowledge
  • Copyright © Shenzhen BBIEN Technology Co.,Ltd All rights reserved.