Stencil Printing SMT Red Glue Epibond Adhesives 200ml And 300ml Tube

Stencil printing SMT red glue epibond adhesives 200ml and 300ml tube BBIEN SMT red glue is a kind of epoxy resin adhesive for wave soldering and reflowing soldering processing.Good stable curing shapes without stringing,overflowing and slumping are achieved even at a super high speed and long time printing.Stencil epoxy surface mount adhesive is formulated to meet the performance and quality requirements of printed circuit board manufacturers.BBIEN packing for stencil epibond adhesives are 200ml and 300ml cartridge/tube


Product Details

Stencil printing SMT red glue epibond adhesives 200ml and 300ml tube

Brief Introduction for SMT red glue epibond adhesives

BBIEN’s stencil printing Surface Mount Adhesives are designed for holding in place bottom side – and some mixed technology – surface mount components during the wave soldering process. Epibond®are high-quality non-slumping and non-stringing surface mount technology adhesives applied by dot dispensing, printing equipment and pin transfer, giving consistent dot profile and fast .

Feature of BBIEN red glue adhesive

- For Printing and Dispensing Applications,Fast Curing and Non-Stringing Formula

- Good for High Speed Placement Equipment- High Shear Strength

- Available in Industry Standard Sizes; Non-REACH Compliant

· Dispense, print and pin transfer application.

· High-visibility red or yellow options.

· Room temperature stability, 6-month room temperature shelf life.

· Non slumping and non stringing.

· Screen printable with BBIEN CUT laser stencils to SMD adhesive guidelines.

BBIEN stencil printing SMT surface mount adhesives offer excellent performance for all print and dispensing

· Non-slumping and non-stringing.

· Room temperature stability.

· Dispense, print and pin transfer application.

· Consistent dot profile and fact curing.

· High-visibility red or yellow options.

BBIEN Stencil Epibond Surface Mount Adhesives Typical Cure Profile

A correct thermal profile is critical to ensure that the adhesive achieves maximum mechanical strength and a homogeneous cure:

· Ensure the material is heated to the correct temperature for the specific time.

· maximum thermal ramp rate is 1.5 to 2.0°C/second to ensure a homogeneous cure.

Printed Adhesive

· Sales/support in every major electronics geographic market

· Local and consistent technical support regionally and globally

· Consistent product performance globally

Dispensed Adhesive

Part of physical feature and specification





Shear Strength

Cure Temperature

Cure Speed





Red Glue








l  Treating condition:85℃×85%RH×DC50V×1000hrs. 

l  JIS Z3197 Measured at comb electrode model II (G10) 



SMT Red Glue adhesive


Epoxy resin adhesive


Tacky Paste/red-colored

Specific gravity


Viscosity at 25℃,5rpm


Thixotropy index


Adhesive Strength  2125C

Mini-mold tr

SOP·IC 16P                              

44N(4.5kgf)0.2mgr twin

45N(4.6kgf)0.3mgr twin

92N(9.4kgf)0.8mgf single×2

Electric Property

Volume resistance

Insulation resistance

Initial value

After treating*

Dielectric constant

Dielectric loss tangent

3.6×1016Ω·cm    JIS K6911

1.2×1014Ω        JIS Z3197


3.12/1MHZ      JIS K6911

0.012/1MHZ     JIS K6911

Preservation condition


To be strictly kept at 3℃ ~10℃ in refrigerator

Main content

Main Epoxy resin and some(adhesive agent,wetting agent and surfactant…

Package style for BBIEN SMT red glue adhesive

Package styles



Export outer packing

tube packing



20-25pcs per carton


1)Much lower temperature curing is aimed at amd is practically possible.

2)Very good stable curing shapes without stringing and slumping are achieved at super high speed dispensing and very amall dots.

3)stable adhesive strength can be obtained with a variety of SMD.

4)Long-term preservation stability is expected.

5)High heat-resistivity and excellent electric properties are possessed.

6)Usable for screen printing.

Curing condition

○Recommended curing condition: Over 60 sec after PCB’s surface temperature has reached 150℃.or over 90 sec after PCB’s surface temperature has reached 120℃.

○When the higher curing temperature and the longer curing time, the stronger adhesive strength can obtained. We would suggest you to search out an optimum curing condition, for the temperature is different on the adhesive may occasionally vary according to the size,material,etc.of component parts mounted on PCBs.

How to use Red glue adhesive

○Adhesive should be preserved in refrigerator (below 5±3℃) to keep on its quality.

○Before processing, the adhesive should be taken out from the refrigerator for de-freezing about a few hours until it reaching the room temperature.

○The bottom of printing screen should be cleaned timely for good printing shape.

○Toluene or ethyl acetate is possible to use for cleaning up this adhesive.

This product, during handling or use, may be hazardous to health or the environment. Read the Material safety Data Sheet and warning label before using this product.

Health & Safety:

Consult the MSDS for all safety information. The most recent version of the SDS is available from BBIEN.Inhalation of the flux solvent and volatilized activator fumes, which are generated at soldering temperatures, may cause headaches, dizziness and nausea. Suitable fume extraction equipment should be used to remove the flux from the work area. An exhaust at the exit end of the wave solder machine may also be needed to completely capture the fumes. Observe precautions during handling and use.

Suitable protective clothing should be worn to prevent the material from coming in contact with skin and eyes.

Exported countries:

BBIEN stencil Epoxy resin adhesive have been exported to Vietnam, Bangladesh, Hongkong, SouthKorea, Russia, Japan, India, brazil,Colombia,Argentia…

We are appreciated your kindly feedback and inquiries.

Products Photos

BBIEN Technology is one of the professional manufacturers and suppliers of stencil printing smt red glue epibond adhesives 200ml and 300ml tube. We have professional workers who have consummate skills producing high quality products in our factory. Welcome to buy our discount and low price stencil printing smt red glue epibond adhesives 200ml and 300ml tube made in China. Pricelist and quotation consultation are available if you need.


Subscribe to our email list
Sign up with your name and email to get the latest proway updates, exclusive access to promotions,        sales events, pre-order sales & more!
Connect with BBIEN
Become our fan, follow us & subscribe for the latest updates        and deals
QR Code
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Download & Knowledge
  • Copyright © Shenzhen BBIEN Technology Co.,Ltd All rights reserved.